Forge Motorsport Shop

Forge Motorsport Boost Tap for the Mini F56 and F55.  The adaptor plate is installed between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge without having to cut into any original equipment.  Simple to fit using the existing MAP screw, hardware and fitting instructions which are supplied and the application is fully reversible.  OEM T-Map Sensor Part Number: 13628637899     In The Box: x1 Forge Motorsport Mini F56 & F55 Boost Tap x1 M6x16 Cap Head Bolt x1 3 meter length of 4mm Vacuum Hose x10 Cable Ties x1 Forge Motorsport Sticker  x1 Set of installation instructions           Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This adaptor plate is installed between the boost (MAP) sensor and its mounting Boss. This allows for a takeoff to run a vacuum operated valve or for connection to a boost gauge, without having to cut into any original equipment.  Vacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.   Compatible with the following BMW MAP sensors:  13627551429  13627585493  13627599042 BMW Compatible Vehicles:1' F20  (07/2010 — 02/2015)1' F20 LCI (05/2014 — 06/2016)1' F21 (07/2010 — 02/2015)1' F21 LCI (09/2014 — 06/2016)2' F22 (10/2012 — 06/2016)2' F87 M2 LCI (10/2016 — 12/2018)2' F23 (04/2014 — 06/2016)3' F30 (02/2011 — 01/2016)3' F30 LCI (10/2014 — 10/2018)3' F80 M3 (04/2012 — 06/2015)3' F80 M3 LCI (01/2015 — 10/2018)3' F31 (07/2011 — 06/2015)3' F31 LCI (12/2014 — 06/2016)3' F34 GT (07/2012 — 06/2016)3' F35 (06/2011 — 08/2015)3' F35 LCI (01/2015 — 08/2016)4' F32 (11/2012 — 01/2017)4' F82 M4 (02/2013 — 02/2017)4' F82 M4 LCI (05/2016 — 12/2018)4' F33 (03/2013 — 02/2017)4' F83 M4 (06/2013 — 02/2017)4' F83 M4 LCI (05/2016 — 12/2018)4' F36 Gran Coupé (07/2013 — 12/2016)5' F07 GT LCI (08/2012 — 02/2017)5' F10 (06/2010 — 10/2016)5' F10 LCI (10/2012 — 10/2016)5' F11 (06/2010 — 06/2013)5' F11 LCI (10/2012 — 02/2017)5' F18 (03/2011 — 08/2013)5' F18 LCI (10/2012 — 04/2017)5' F90 M5 (01/2016 — 12/2018)6' F06 Gran Coupé (10/2011 — 02/2015)6' F06 Gran Coupé LCI (09/2014 — 09/2018)6' F12 (03/2011 — 02/2015)6' F12 LCI (05/2014 — 05/2018)6' F13 (03/2011 — 02/2015)6' F13 LCI (06/2014 — 10/2017)X1 E84 (04/2009 — 12/2015)X3 F25 (02/2011 — 08/2017)X4 F26 (05/2013 — 03/2018)X5 F15 (10/2014 — 06/2018)X5 M F85 (04/2013 — 06/2018)X6 F16 (11/2014 — 12/2018)X6 M F86 (10/2013 — 12/2018)Z4 E89 (01/2011 — 08/2016)MS BMW Motorsport ( — ) In the Box: Small Forge Sticker3.5mm Black Vac PortCable ties (x10)4mm Vacuum Hose (x3m)Instructions QR Label   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Boost Tap for Ford Focust ST 180 (Mk7). This adaptor plate installs between the boost (MAP) sensor and mounting surface.  This allows a tap to run a vacuum operated valve or for connection to a boost gauge. When running this tap you are also able to retain your original engine cover.   In the box:1 x Vacuum tap1 x M6x20 Allen Cap Bolt10 x Cable Ties1 x 2000mm of 4mm Vacuum Tube   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

FMBGFK9 – Audi RS3 (8V) boost tap The Forge Motorsport boost tap for the Audi RS3 (8V) allows for fitment of a boost gauge or indeed anything that needs a boost signal, e.g. a water meth pressure sensor, to the 2.5 TFSI engine. Previously we were able to obtain a boost reference from under the MAP sensor, but due to changes in the manifold design, this is no longer possible. This new boost tap can be installed in under 10 minutes and is fully reversible should you ever wish to remove it. Comes complete with an installation kit, and full instructions. *Will not fit Engine code DAZA (TTRS 2017- and RS3 Facelift 2017-)   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a Boost Tap Manifold for VAG 3.0 Supercharged engine as found in 2010 onwards S4 S5 Q5 A6 A7 3.0T. It will allow connection of a boost gauge to these engines with the minimum of effort.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge Motorsport Boost Tap Kit for 1.2 TSI Engines with code CBZA, CBZB or CBZC. This adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment.  Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible. In the Box: Small Forge Sticker3.5mm Vac PortCable ties (x10)Cork gasket4mm Vacuum HoseInstructions QR Label   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less