performance-st180

Allows exhaust gases to flow much faster. More Power! Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car) This part is sold for motorsport and off road use only and will NOT pass an MOT emissions test or police roadside checks. AIRTEC part no: ATEXHFO7

Read more less

Tubular manifold for Fiesta ST 180. Perfect for fast road or race. Best performance when used with stage 3 Fiestas. The tubular manifold for the Fiesta ST 180 will see best performance gains when used with a stage 3 setup, hybrid or big turbo setups will see the best imrpovements. Stage 1 cars - A standard manifold on a Stage 1 Fiesta will perform perfectly, an upgraded manifold on a stage 1 car will see faster turbo spool but will not see a huge improvement over standard. Stage 2 cars - Higher power cars will see faster turbo spool and some power increase of around 3-5 bhp. This is very hard to prove on a dyno on a stage 2 car. Stage 3 cars - A turbular manifold is a must have for any stage 3 Fiesta! The standard manifold will be finding it hard to release the air with the manifold pressure not being able to cope wit hthe power. A tubular manifold has a massive increase in air flow which could see big gains compared to standard.

Read more less

  Cobra Sport exhausts systems come with a lifetime warranty for the original purchaser, giving you ultimate peace of mind. All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. For any questions, queries or simply for our advice on these products call us on + 44 (0)114 244 7123. Product Description Reviews Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Fiesta ST performance exhausts are made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. This resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version (excluding the centre silencer) which is a louder option. All relevant fittings and gaskets are supplied. Please note: Cobra systems are made to order with a rough lead time of 7-21 working days COBRA SPORT PRODUCT REVIEW   The system benefits from all of the usual Cobra Sport refinements with mandrel bent, TIG welded, grade 304 stainless steel used throughout the systems as standard. You can be assured of only the best quality in a Cobra Sport system. Matt Thomas, Sales Manager at Cobra Sport says “The new ST system has provided us with some exciting results, independent testing has revealed that the 3” Turbo back upgrade produces an additional 13bhp from the standard system with a 10% increase in torque. Overall the Cobra Sport system makes a great car even better”. The styling of the system is finished off with either a subtle ‘OE look’ twin 3” slash-cut tailpipe in a highly polished 304 stainless steel finish. RELATED MEDIA FILES   Example of Fiesta ST180 3" performance exhaust (cat back - resonated)   Interior Exhaust example of Fiesta ST180 3" performance exhaust (cat back - resonated) Example of Fiesta ST180 3" sports exhaust (Cat back - non resonated) Cobra Sport Exhausts Ford promotional video.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Fiesta ST performance exhausts are made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. This sports exhaust is part of the Cobra Sport Venom range and is extremely loud. This exhaust is sold for non road use only and will exceed all legal noise regulations. All relevant fittings and gaskets are supplied. Cobra Sport have taken their range of exhausts for the Ford Fiesta ST180 to the next level with the release of a Venom style system finished with either a single or twin tailpipe. The new Venom systems remove the back box found in our cat back systems to offer an exhaust system with unrivalled sound and tone. The bore size has been increased to 3” (76.2mm) and the stainless steel pipework which runs the full length of the vehicle allowing unrivalled flow rates whilst creating the pitch perfect aggressive sound preferred by many ST180 owners. The Cobra Sport system Venom system delivers a significant weight saving over standard. Testing of the Venom system resulted in a staggering 21% reduction in weight from the OE system’s 14.42kg, with the Cobra Sport system weighing in at only 11.2kg. The most significant improvement of the Venom system is the incredible sound quality produced by the simplified pipework. The volume of the Venom cat back system which includes a resonated section increases by +8.7db to 89.9db at 4000rpm. Matched with the additional Sports Cat front pipe the sound levels at 4000rpm rise by +15db to 96.2db creating an incredibly vibrant deep sporty exhaust tone. Part number: FD77 We aim to deliver all exhaust products within 7-10 working days of placing your order. However, please allow up to 20 days for deliveries.

Read more less

Performance lies at the very heart of all Direnza products and nowhere is this more noticeable than Direnza Track Series Exhaust Manifolds. A must have upgrade for anyone looking to gain some serious power gains from their ST180 Fiesta; this manifold is not only precision engineered from the very best T304 stainless steel but we have beefed up the mandrel bent tubing to an extra thick 3mm – much more than your average bolt-on upgrade. These extra thick walls provide a comforting boost in durability so your Fiesta can take the use and abuse it was designed for. Equipped with a Direnza Track Series Exhaust Manifold any ST180 Fiesta will benefit from faster turbo spool and increased airflow which will help release the hidden potential of your car. This is all the more noticeable on advanced performance builds; this manifold is best accompanied with a hybrid or big turbo setup to really maximise those power gains. Our tried and tested 3mm thick tubular design; backed up with extra strong TIG welding and CNC machined flanges make the Direnza Track Series Exhaust Manifold perfect for your ST180 Fiesta on the road or the track. Not only does it enhance performance but will also bolster that sweet engine soundtrack and best of all; it is designed to directly replace the much more restrictive OEM log-type manifold. Fitment Ford Fiesta MK7 ST180 1.6 Ecoboost 2013+Ford Fiesta MK7.5 ST200 1.6 Ecoboost 2016+ Please note – The OEM manifold uses a hard line system which needs to be replaced with the supplied braided hose setup when fitting this item Product Category Exhaust Manifold Part Number DZEM066 Exhaust Manifold - Branch Bore (mm) 42

Read more less

Direnza Ceramic Coated Exhaust Downpipes are manufactured from T304 grade stainless steel, and feature smooth, matte ceramic finish to give extra heat protection on those intense track-sessions. A direct replacement for the stock part, Direnza mandrel-bent exhaust components are fully TIG welded and feature CNC-machined flanges for strength and an accurate, secure fit everytime. Engineered to not only improve power and torque across the entire RPM range but Direnza exhaust components improve throttle response to help you push further and faster on the road or the track Fitment Ford Fiesta MK7 ST180 1.6 Ecoboost 2013+Ford Fiesta MK7.5 ST200 1.6 Ecoboost 2016+ Part Number DZED049 Exhaust Pipe - Length (mm) 560 Exhaust Pipe - Pipe Bore (mm) 76

Read more less

FORD FIESTA MK7 2008-2017 HIGH QUALITY DUAL EXIT STAINLESS STEEL AXEL-BACK EXHAUST SYSTEM WITH SILENCER AND EXHAUST PIPES fits : FORD FIESTA MK 7 2008-2017 ALL VERSIONS - STANDARD, ZETEC S, ST   Works Perfectly with the Maxton Design RS Style Rear Bumper- FO-FI-7-RS-R1F Pipe Diameter: 2.5 Inch Tip Diameter: 4 inch   COMPLETE SET CONTAINS: READY FOR MOUNTING DUAL EXIT STAINLESS STEEL AXEL-BACK EXHAUST SYSTEM WITH SILENCER AND EXHAUST PIPES    Product is made of Stainless Steel.Designed for all types of Ford Fiesta (2008-2017) :* Ford Fiesta Standard * Ford Fiesta Titanium * Ford Fiesta ZETEC * Ford Fiesta ZETEC S (ST-Line)* Ford Fiesta ST System has EEC Type-Approval certificate Homologation CEE.Approval number : e3*70/157/*2007/34*0014*00 Silencer type : 3540/Ford Fiesta   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Miltek Fiesta ST 180 CatBack (Resonated - Quieter) Release The flow from the new MK7 ST engine with a milltek sport resonated - quieter sports exhaust system with a beautiful engine note the new ford turbo 1.6 ecoboost engine is brought to life with this piece of artwork again crafted by the masters of milltek sport The system features a full 70mm bore size, full stainless pipework and 2x GT80 Style tailpipes - choose finish in drop down menu

Read more less

Cat-back-Race system. Non-resonated (louder) with Twin 80mm GT80 Polished Tips Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXFD100 Cat-back-Race system. Non-resonated (louder) with Polished Tips 69.85 2.75 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

This Cobra Sport exhaust is made with T304 grade stainless steel, mandrel bent and Tig welded which will allow a smooth flow to maximize power gains. This is made in 3"/76.2mm pipework and fits from the turbo backwards (Turbo back system) these parts replace the front pipe, standard catalyst, centre and rear sections. This high flow sports cat version will enable you to pass a UK MOT emissions test or police road side checks. This resonated system includes the centre silencer and has a subtle but sporty tone. This part is also available as a non-resonated version (excluding the centre silencer) which is a louder option. Single 4" (101.6mm) tailpipe. All relevant fittings and gaskets are supplied. (Except turbo gasket). Please Note:- Some of the fitted exhaust images may show alternative part options. Single 4'' - part no: FD67ATP10Twin 3'' inward - part no: FD66ATP57 Twin 3'' inverted - part no: FD66ATP76    We aim to deliver all exhaust products within 7-10 working days of placing your order. However, please allow up to 20 days for deliveries.

Read more less

Direct fit for the 2014+ Ford Fiesta STExtremely aggressive turbo and exhaust tone under acceleration and boost 3", 304 stainless steel design allows for uninterrupted exhaust flow and easy installation Includes stainless steel 3-bolt CNC mounting flange to the turbo Mates with the stock cat-back exhaust or any aftermarket exhaust with a 2.5" mid-pipe Mishimoto Lifetime Warranty Mishimoto is the world leader in performance cooling for the Automotive, Truck, Jeep, and Powersports communities. Watch to learn about everything we do and who we are!Purchase Includes (1) Stainless Steel Downpipe with CNC 3-bolt flange, Flex Coupler, and 2-bolt Flange (1) High-Flow Catalytic Converter (1) 2.5" Exhaust Gasket Mounting Hardware Mishimoto Lifetime Warranty Fits 2013+ Ford Fiesta ST Engine Codes 1.6L EcoBoost Chassis Codes B2E Note The Mishimoto downpipe is for track and off-road use only. This downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle's ECU after installing the downpipe.Note Power gains will vary depending on the type of ECU tune that is applied to the vehicle, and other supporting modifications that are installed. The catalytic converter is manufactured using 304 grade automotive stainless steel. This particular grade of stainless has the tendency to form a protective layer of surface rust in wet/humid/snowy climates or when exposed to salted roads. This layer is superficial and will not penetrate the metal itself. It can be removed using soap and water and a steel Brillo or S.O.S pad. In the rare event that 304 stainless steel pipes become rusted through, the Mishimoto Lifetime Warranty will cover replacement.

Read more less

This Cobra Sport exhaust is made with T304 grade stainless steel, mandrel bent and Tig welded which will allow a smooth flow to maximize power gains. This part is made in 3"/76.2mm bore pipework and fits from the turbo to the centre section. This part is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks. This part however, is also available as a high flow sports catalyst version, which will pass these checks. All relevant fittings and gaskets are supplied. (except turbo gasket). Part no: FD70 We aim to deliver all exhaust products within 7-10 working days of placing your order. However, please allow up to 20 days for deliveries.

Read more less