Golf MK4

The much loved 1.8T engine has proved itself as being not only being very capable in producing high power figures but in being very reliable at the same time. The key to this reliability is the lubrication system, which can quickly become overwhelmed when cars are driven quickly - or on track - causing oil starvation. Under extreme acceleration, braking or cornering, the oil can momentarily run out of the sump under centrifugal force, causing a temporary starvation through the oil-ways, putting critical bearings and bores at risk of damage.For those with bottomless pockets, a ‘dry sump’ system is the ideal preventative solution. But for those in the real world, our neatly engineered solution, based around a brand new OE-spec sump pan is the perfect alternative. Carefully configured baffles and Viton oil control valves ensure that the lubricant can easily move around the engine, but retains a minimum sump capacity, even under the most severe of ‘g’ forces. The relatively soft Viton plates react far quicker than equivalent metal flaps - which are often used on lesser alternatives - and have been designed to withstand the rigours of the high temperatures of oil and its contaminants.Our 1.8T Baffled Sump (FMBSMP18T) is a truly effective upgrade. An essential item for any race, track or tuned car its makes a sensible investment. It’s certainly cheaper than an engine rebuild! Our baffled sump comes complete with an oil level sensor blanking plate if you do not have a sensor fitted.   Fits Multiple Cars

Read more less

These adaptors are CNC machined from alloy billets and will eradicate the issues of the original plastic block connections breaking. The Cam cover breather installs into the OEM barb (pull out the original and tap in the new). Once installed, these adaptors allow you to connect braided hose with Dash 10 (10an) fittings. These are ideally suited for those wishing to redesign the breather installation or simply want to improve upon the original installation.   Fits Multiple Vehicles

Read more less

A silicone replacement intercooler to throttle body hose, suitable for the 1.8T 150/180 hp engines   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.

Read more less

Fits: Golf MK4 1.9Tdi  Models: 1998-2004 4 Line set Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal feel – firmer under pressure More efficient braking- the PTFE lined, Stainless steel will not expand under load unlike OEM rubber hoses Long Lasting- PVC outer and Stainless-Steel end fittings will outlast the standard Mild Steel and rubber lines many times Available in many outer colour options to compliment your vehicle Rigorously tested and approved to the FMVSS 106 certification standards

Read more less

The Splitter is a truly remarkable valve that gives a combination of blow off and recirculation valve operation, all at the same time, and has been specifically designed for the many turbo engined applications that operate metered airflow management systems. This means you get all the noise of the blow off valve whilst retaining the compatibility with the recirculation requirements of the engine management system. As a bonus we also offer the ability to convert the valve to recirculation only mode for those times when stealth running is required. This valve uses a Brass piston which utilises new sealing technology along with a variable spring preload, incorporating a ratchet type top adjuster that will allow for the positive and precise adjustment to match the valve to your engine. This is achieved by using a unique single, conical, progressive rate spring, that can allow for the retention of boost pressure over a wide adjustment range. This unique spring design also allows for unrestricted piston travel and flow volume regardless of the amount of pre-load adjustment added to the spring. Other manufacturers' valves use cylindrical springs with adjustable pre-load, which often experience restricted piston travel and a reduction in flow volume. When we say our products are Engineered For Performance, it's not a catchy sales phrase, it's the truth. and we prove it with every product we manufacture. Note: This valve requires installing the opposite way to the original Bosch Valve. This means that the side pipe is fitted into the Turbo Intake Hose, and the base pipe connects to the hose that runs to the boost side of the turbo.   In The Box:1 x FMDVSPLTR Valve1 x Valve Blanking Cap1 x Instruction Booklet1 x Forge Sticker If you are unsure if this product is suitable for your application, please contact us.  The valve has a port size of 25mm         To service this valve, access the valve piston by removing the 3 cap screws at the base of the valve and simply clean the piston chamber using brake cleaner or similar cleaning fluid before installing the new spring and piston. Please observe the correct spring and piston orientation when installing the serviceable parts, as seen in the attached drawing.   Adjustment guide. First turn the valve adjustment knob all the way down in the anti-clockwise direction, which will adjust the spring it to its lowest tension. Then turn the valve adjustment knob in the clockwise direction to the appropriate tension level, as set out below. Standard engine – 16 clicks. Stage 1 remap – 21 clicks. Stage 2 remap – 25 clicks. These adjustment recommendations are a general guide and you may find that your engine requires fine tuning by 1 or 2 clicks in either direction to achieve optimum performance. There will be no significant performance benefit adjusting the valve over 30 clicks as the spring will have reached its maximum operating tension.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

This turbo recirculation valve is the result of of 25 years of experience and engineering expertise. With the reputation for innovating and manufacturing the best automotive valves in the world, you can be certain that there is currently no better replacement valve available. The FMDV008PA version seen here has the benefit of a 90 degree vacuum port, that can be rotated to three different orientations. This is often the preference where either space is restricted, or the original fitment valve has a 90 degree connection, either on the valve or connecting hose. Forge's recirculation valve features a greater flow rate than the OEM Bosch Valve, as well as a faster response time, due to our revised design. By using the associated service kit (FMDVSK), as seen below, the life of the valve can be extended, and the performance can be maintained. With a lifetime guarantee, you can be sure the valve is reliable for your car.  It is fully customisable to fit your application with two uprated springs provided in the kit. Forge Motorsport's improvement on the original valve has a compact design, meaning easy fitment under the engine cover. Please select whether you want a black or matt silver valve, using the options above. In The Box:1 x FMDV008PA Valve1 x Uprated Yellow Spring1 x Uprated Blue Spring1 x Cable Tie1 x 2.5mm Allen key2 x 35mm Hose Clamps1 x Instruction Booklet1 x Forge Sticker Click here to see our video on how to service this product *Porsche 991/911 Turbo will require 2 Valves - please see our seperate product (FMDV008P2 below)* The valve has a port size of 25mm If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

This quickshifter, once installed, will allow you to shorten the movement of your gear shift in order to obtain the optimum shifting times required for performance driving. You can personally customise the throw to suit your own preference due to an infinitely adjustable pivot mechanism. Click on the 'fitting guide' tab above, for detailed instructions. This unit will fit VW/Audi/SEAT/Skoda (VAG) vehicles with the 5 speed transverse gear boxes (2000 onwards) as seen in the 'compatible vehicles' tab above. This product is supplied with two sizes of pin and one ball fitment, to ensure that it will match the various possible cables found on these vehicles. This WILL also fit the 6 speed 1.4 litre Twincharged engines as found in the Golf Mk5 , Golf Mk6 and Scirocco. On these vehicles it replaces the OEM part No. 1K0 711 046M. This WILL NOT fit vehicles with AGU engine code   In The Box:1 x FMVAG5QS Shifter1 x 8.4mm Pin1 x 10mm Pin1 x Ball Pin1 x 8mm Nut1 x Bag of Grease1 x Instructions1 x Forge Sticker This part is compatible with:Audi A3/S3/Sportb./Lim./qu (2004 - 2013)  Audi A3 Cabriolet (2008-2013)        Volkswagen Beetle (2012-2016)       Volkswagen Beetle Cabrio (2013-2016)       Volkswagen Caddy (2004-2016)        Volkswagen CC (2012-2016)        Volkswagen Eos (2006-2016)             Volkswagen Golf Cabriolet (2012-2016)        Volkswagen Golf/Variant/4Motion (2004-2014)  Volkswagen Golf Plus (2005-2014)      Volkswagen Jetta/syncro (2006-2016)      Volkswagen Passat/4Motion/Santana (2008-2015)       Volkswagen Passat CC (2009-2012)     Volkswagen Scirocco (2009-2016)    Volkswagen Touran (2003-2016)         Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FITS MULTIPLE VEHICLES

Read more less

This replacement adjustable sideshifter will allow you to shorten the side to side movement of your gear shift in order to obtain the optimum shifting times required for performance driving . You can personally customise the lateral movement to suit your own preference due to an infinitely adjustable pivot mechanism. Click on the 'fitting guide' tab above, for detailed instructions. This unit will fit all VAG 6 speed gear boxes as found in the vehicles listed in the 'compatible vehicles' tab above. (Please note: this does not fit the Skoda Fabia/VW Polo/Seat Ibiza/1.9 diesel applications) Up to and including 2007 models, the original side to side shifting mechanism on these vehicles should be made of metal with the 2008 and onwards models having the original side to side mechanism made of plastic. (on all models the throw or front to back mechanism is made of metal ) We supply within the kit the necessary parts to allow fitment to both types. Please note: To ensure that this product functions correctly and does not stress associated components, it is essential that the linkage cables are re-adjusted after the installation of this product, as per the fitting instructions.   In The Box:1 x FMVWSQS Shifter1 x 8.0mm Pin1 x 10mm Pin1 x Ball Pin1 x 8mm Nut2 x Top Hat Bush1 x Push On Bush2 x Side Clips1 x Bag of Grease1 x Instructions1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FOR MULTIPLE VEHICLES

Read more less

6 Speed Adjustable Quick Shifter for Audi, VW, SEAT, and Skoda This quickshifter, once installed, will allow you to shorten the movement of your gear shift in order to obtain the optimum shifting times required for performance driving. You can personally customise the throw to suit your own preference, due to an infinitely adjustable pivot mechanism. This wide range of adjustment should allow for adjustment from stock to a 40% decrease in shifter throw. Click on the 'fitting guide' tab above, for detailed instructions. This unit will fit all VAG 6 speed gear boxes as found in the 'compatible vehicles' tab above. This product is supplied with two sizes of pin, and one ball fitment, to ensure that it will match the various possible cables found on these vehicles. To ensure that this product functions correctly and does not stress associated components, it is essential that the linkage cables are re-adjusted after the installation of this product, as per the fitting instructions. Please note: This does not fit the Skoda Fabia/VW Polo/SEAT Ibiza/1.9 diesel applications.    In The Box:1 x FMVWQS Shifter1 x 8.4mm Pin1 x 10mm Pin1 x Ball Pin1 x 8mm Nut1 x Bent Nail1 x Bag of Grease1 x Instructions1 x Forge Sticker If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised. For Multiple Cars

Read more less

This actuator is designed for the Volkswagon Golf and Polo 1.8T engines that are transversely mounted. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACVAG03/G Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A set of three silicone boost hoses complete with alloy couplers for the Vag 1.9 PD 150 diesel engine as fitted to the Seat Leon/ VwGolf Mk4/ Vw Bora   This will only fit up to 2001 models The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES *T&C’s apply   Please Note: In line with our policy to constan

Read more less

This replacement Fluoro Silicone Turbo Hose,130 or 150 Diesel, and alloy couplers is an essential upgrade for all owners with tuned cars running higher boost pressures. The hose is made from Fluorosilicone with Nomex reinforced lamination. This combination can withstand the high temperatures associated with being fitted so close to the turbocharger, and withstand the oil that may accumulate within the hose, which would normally lead to degradation if ordinary silicone was used.   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less